This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Cloud Platforms

Installation of Talos Linux on many cloud platforms.

1 - AWS

Creating a cluster via the AWS CLI.

Creating a Cluster via the AWS CLI

In this guide we will create an HA Kubernetes cluster with 3 worker nodes. We assume an existing VPC, and some familiarity with AWS. If you need more information on AWS specifics, please see the official AWS documentation.

Set the needed info

Change to your desired region:

REGION="us-west-2"
aws ec2 describe-vpcs --region $REGION

VPC="(the VpcId from the above command)"

Create the Subnet

Use a CIDR block that is present on the VPC specified above.

aws ec2 create-subnet \
    --region $REGION \
    --vpc-id $VPC \
    --cidr-block ${CIDR_BLOCK}

Note the subnet ID that was returned, and assign it to a variable for ease of later use:

SUBNET="(the subnet ID of the created subnet)"

Official AMI Images

Official AMI image ID can be found in the cloud-images.json file attached to the Talos release:

AMI=`curl -sL https://github.com/siderolabs/talos/releases/download/v1.3.7/cloud-images.json | \
    jq -r '.[] | select(.region == "'$REGION'") | select (.arch == "amd64") | .id'`
echo $AMI

Replace amd64 in the line above with the desired architecture. Note the AMI id that is returned is assigned to an environment variable: it will be used later when booting instances.

If using the official AMIs, you can skip to Creating the Security group

Create your own AMIs

The use of the official Talos AMIs are recommended, but if you wish to build your own AMIs, follow the procedure below.

Create the S3 Bucket

aws s3api create-bucket \
    --bucket $BUCKET \
    --create-bucket-configuration LocationConstraint=$REGION \
    --acl private

Create the vmimport Role

In order to create an AMI, ensure that the vmimport role exists as described in the official AWS documentation.

Note that the role should be associated with the S3 bucket we created above.

Create the Image Snapshot

First, download the AWS image from a Talos release:

curl -L https://github.com/siderolabs/talos/releases/download/v1.3.7/aws-amd64.tar.gz | tar -xv

Copy the RAW disk to S3 and import it as a snapshot:

aws s3 cp disk.raw s3://$BUCKET/talos-aws-tutorial.raw
aws ec2 import-snapshot \
    --region $REGION \
    --description "Talos kubernetes tutorial" \
    --disk-container "Format=raw,UserBucket={S3Bucket=$BUCKET,S3Key=talos-aws-tutorial.raw}"

Save the SnapshotId, as we will need it once the import is done. To check on the status of the import, run:

aws ec2 describe-import-snapshot-tasks \
    --region $REGION \
    --import-task-ids

Once the SnapshotTaskDetail.Status indicates completed, we can register the image.

Register the Image

aws ec2 register-image \
    --region $REGION \
    --block-device-mappings "DeviceName=/dev/xvda,VirtualName=talos,Ebs={DeleteOnTermination=true,SnapshotId=$SNAPSHOT,VolumeSize=4,VolumeType=gp2}" \
    --root-device-name /dev/xvda \
    --virtualization-type hvm \
    --architecture x86_64 \
    --ena-support \
    --name talos-aws-tutorial-ami

We now have an AMI we can use to create our cluster. Save the AMI ID, as we will need it when we create EC2 instances.

AMI="(AMI ID of the register image command)"

Create a Security Group

aws ec2 create-security-group \
    --region $REGION \
    --group-name talos-aws-tutorial-sg \
    --description "Security Group for EC2 instances to allow ports required by Talos"

SECURITY_GROUP="(security group id that is returned)"

Using the security group from above, allow all internal traffic within the same security group:

aws ec2 authorize-security-group-ingress \
    --region $REGION \
    --group-name talos-aws-tutorial-sg \
    --protocol all \
    --port 0 \
    --source-group talos-aws-tutorial-sg

and expose the Talos and Kubernetes APIs:

aws ec2 authorize-security-group-ingress \
    --region $REGION \
    --group-name talos-aws-tutorial-sg \
    --protocol tcp \
    --port 6443 \
    --cidr 0.0.0.0/0

aws ec2 authorize-security-group-ingress \
    --region $REGION \
    --group-name talos-aws-tutorial-sg \
    --protocol tcp \
    --port 50000-50001 \
    --cidr 0.0.0.0/0

Create a Load Balancer

aws elbv2 create-load-balancer \
    --region $REGION \
    --name talos-aws-tutorial-lb \
    --type network --subnets $SUBNET

Take note of the DNS name and ARN. We will need these soon.

LOAD_BALANCER_ARN="(arn of the load balancer)"
aws elbv2 create-target-group \
    --region $REGION \
    --name talos-aws-tutorial-tg \
    --protocol TCP \
    --port 6443 \
    --target-type ip \
    --vpc-id $VPC

Also note the TargetGroupArn that is returned.

TARGET_GROUP_ARN="(target group arn)"

Create the Machine Configuration Files

Using the DNS name of the loadbalancer created earlier, generate the base configuration files for the Talos machines.

Note that the port used here is the externally accessible port configured on the load balancer - 443 - not the internal port of 6443:

$ talosctl gen config talos-k8s-aws-tutorial https://<load balancer DNS>:<port> --with-examples=false --with-docs=false
created controlplane.yaml
created worker.yaml
created talosconfig

Note that the generated configs are too long for AWS userdata field if the --with-examples and --with-docs flags are not passed.

At this point, you can modify the generated configs to your liking.

Optionally, you can specify --config-patch with RFC6902 jsonpatch which will be applied during the config generation.

Validate the Configuration Files

$ talosctl validate --config controlplane.yaml --mode cloud
controlplane.yaml is valid for cloud mode
$ talosctl validate --config worker.yaml --mode cloud
worker.yaml is valid for cloud mode

Create the EC2 Instances

change the instance type if desired. Note: There is a known issue that prevents Talos from running on T2 instance types. Please use T3 if you need burstable instance types.

Create the Control Plane Nodes

CP_COUNT=1
while [[ "$CP_COUNT" -lt 4 ]]; do
  aws ec2 run-instances \
    --region $REGION \
    --image-id $AMI \
    --count 1 \
    --instance-type t3.small \
    --user-data file://controlplane.yaml \
    --subnet-id $SUBNET \
    --security-group-ids $SECURITY_GROUP \
    --associate-public-ip-address \
    --tag-specifications "ResourceType=instance,Tags=[{Key=Name,Value=talos-aws-tutorial-cp-$CP_COUNT}]"
  ((CP_COUNT++))
done

Make a note of the resulting PrivateIpAddress from the controlplane nodes for later use.

Create the Worker Nodes

aws ec2 run-instances \
    --region $REGION \
    --image-id $AMI \
    --count 3 \
    --instance-type t3.small \
    --user-data file://worker.yaml \
    --subnet-id $SUBNET \
    --security-group-ids $SECURITY_GROUP
    --tag-specifications "ResourceType=instance,Tags=[{Key=Name,Value=talos-aws-tutorial-worker}]"

Configure the Load Balancer

Now, using the load balancer target group’s ARN, and the PrivateIpAddress from the controlplane instances that you created :

aws elbv2 register-targets \
    --region $REGION \
    --target-group-arn $TARGET_GROUP_ARN \
    --targets Id=$CP_NODE_1_IP  Id=$CP_NODE_2_IP  Id=$CP_NODE_3_IP

Using the ARNs of the load balancer and target group from previous steps, create the listener:

aws elbv2 create-listener \
    --region $REGION \
    --load-balancer-arn $LOAD_BALANCER_ARN \
    --protocol TCP \
    --port 443 \
    --default-actions Type=forward,TargetGroupArn=$TARGET_GROUP_ARN

Bootstrap Etcd

Set the endpoints (the control plane node to which talosctl commands are sent) and nodes (the nodes that the command operates on):

talosctl --talosconfig talosconfig config endpoint <control plane 1 PUBLIC IP>
talosctl --talosconfig talosconfig config node <control plane 1 PUBLIC IP>

Bootstrap etcd:

talosctl --talosconfig talosconfig bootstrap

Retrieve the kubeconfig

At this point we can retrieve the admin kubeconfig by running:

talosctl --talosconfig talosconfig kubeconfig .

The different control plane nodes should sendi/receive traffic via the load balancer, notice that one of the control plane has intiated the etcd cluster, and the others should join. You can now watch as your cluster bootstraps, by using

talosctl --talosconfig talosconfig  health

You can also watch the performance of a node, via:

talosctl  --talosconfig talosconfig dashboard

And use standard kubectl commands.

2 - Azure

Creating a cluster via the CLI on Azure.

Creating a Cluster via the CLI

In this guide we will create an HA Kubernetes cluster with 1 worker node. We assume existing Blob Storage, and some familiarity with Azure. If you need more information on Azure specifics, please see the official Azure documentation.

Environment Setup

We’ll make use of the following environment variables throughout the setup. Edit the variables below with your correct information.

# Storage account to use
export STORAGE_ACCOUNT="StorageAccountName"

# Storage container to upload to
export STORAGE_CONTAINER="StorageContainerName"

# Resource group name
export GROUP="ResourceGroupName"

# Location
export LOCATION="centralus"

# Get storage account connection string based on info above
export CONNECTION=$(az storage account show-connection-string \
                    -n $STORAGE_ACCOUNT \
                    -g $GROUP \
                    -o tsv)

Create the Image

First, download the Azure image from a Talos release. Once downloaded, untar with tar -xvf /path/to/azure-amd64.tar.gz

Upload the VHD

Once you have pulled down the image, you can upload it to blob storage with:

az storage blob upload \
  --connection-string $CONNECTION \
  --container-name $STORAGE_CONTAINER \
  -f /path/to/extracted/talos-azure.vhd \
  -n talos-azure.vhd

Register the Image

Now that the image is present in our blob storage, we’ll register it.

az image create \
  --name talos \
  --source https://$STORAGE_ACCOUNT.blob.core.windows.net/$STORAGE_CONTAINER/talos-azure.vhd \
  --os-type linux \
  -g $GROUP

Network Infrastructure

Virtual Networks and Security Groups

Once the image is prepared, we’ll want to work through setting up the network. Issue the following to create a network security group and add rules to it.

# Create vnet
az network vnet create \
  --resource-group $GROUP \
  --location $LOCATION \
  --name talos-vnet \
  --subnet-name talos-subnet

# Create network security group
az network nsg create -g $GROUP -n talos-sg

# Client -> apid
az network nsg rule create \
  -g $GROUP \
  --nsg-name talos-sg \
  -n apid \
  --priority 1001 \
  --destination-port-ranges 50000 \
  --direction inbound

# Trustd
az network nsg rule create \
  -g $GROUP \
  --nsg-name talos-sg \
  -n trustd \
  --priority 1002 \
  --destination-port-ranges 50001 \
  --direction inbound

# etcd
az network nsg rule create \
  -g $GROUP \
  --nsg-name talos-sg \
  -n etcd \
  --priority 1003 \
  --destination-port-ranges 2379-2380 \
  --direction inbound

# Kubernetes API Server
az network nsg rule create \
  -g $GROUP \
  --nsg-name talos-sg \
  -n kube \
  --priority 1004 \
  --destination-port-ranges 6443 \
  --direction inbound

Load Balancer

We will create a public ip, load balancer, and a health check that we will use for our control plane.

# Create public ip
az network public-ip create \
  --resource-group $GROUP \
  --name talos-public-ip \
  --allocation-method static

# Create lb
az network lb create \
  --resource-group $GROUP \
  --name talos-lb \
  --public-ip-address talos-public-ip \
  --frontend-ip-name talos-fe \
  --backend-pool-name talos-be-pool

# Create health check
az network lb probe create \
  --resource-group $GROUP \
  --lb-name talos-lb \
  --name talos-lb-health \
  --protocol tcp \
  --port 6443

# Create lb rule for 6443
az network lb rule create \
  --resource-group $GROUP \
  --lb-name talos-lb \
  --name talos-6443 \
  --protocol tcp \
  --frontend-ip-name talos-fe \
  --frontend-port 6443 \
  --backend-pool-name talos-be-pool \
  --backend-port 6443 \
  --probe-name talos-lb-health

Network Interfaces

In Azure, we have to pre-create the NICs for our control plane so that they can be associated with our load balancer.

for i in $( seq 0 1 2 ); do
  # Create public IP for each nic
  az network public-ip create \
    --resource-group $GROUP \
    --name talos-controlplane-public-ip-$i \
    --allocation-method static


  # Create nic
  az network nic create \
    --resource-group $GROUP \
    --name talos-controlplane-nic-$i \
    --vnet-name talos-vnet \
    --subnet talos-subnet \
    --network-security-group talos-sg \
    --public-ip-address talos-controlplane-public-ip-$i\
    --lb-name talos-lb \
    --lb-address-pools talos-be-pool
done

# NOTES:
# Talos can detect PublicIPs automatically if PublicIP SKU is Basic.
# Use `--sku Basic` to set SKU to Basic.

Cluster Configuration

With our networking bits setup, we’ll fetch the IP for our load balancer and create our configuration files.

LB_PUBLIC_IP=$(az network public-ip show \
              --resource-group $GROUP \
              --name talos-public-ip \
              --query [ipAddress] \
              --output tsv)

talosctl gen config talos-k8s-azure-tutorial https://${LB_PUBLIC_IP}:6443

Compute Creation

We are now ready to create our azure nodes. Azure allows you to pass Talos machine configuration to the virtual machine at bootstrap time via user-data or custom-data methods.

Talos supports only custom-data method, machine configuration is available to the VM only on the first boot.

# Create availability set
az vm availability-set create \
  --name talos-controlplane-av-set \
  -g $GROUP

# Create the controlplane nodes
for i in $( seq 0 1 2 ); do
  az vm create \
    --name talos-controlplane-$i \
    --image talos \
    --custom-data ./controlplane.yaml \
    -g $GROUP \
    --admin-username talos \
    --generate-ssh-keys \
    --verbose \
    --boot-diagnostics-storage $STORAGE_ACCOUNT \
    --os-disk-size-gb 20 \
    --nics talos-controlplane-nic-$i \
    --availability-set talos-controlplane-av-set \
    --no-wait
done

# Create worker node
  az vm create \
    --name talos-worker-0 \
    --image talos \
    --vnet-name talos-vnet \
    --subnet talos-subnet \
    --custom-data ./worker.yaml \
    -g $GROUP \
    --admin-username talos \
    --generate-ssh-keys \
    --verbose \
    --boot-diagnostics-storage $STORAGE_ACCOUNT \
    --nsg talos-sg \
    --os-disk-size-gb 20 \
    --no-wait

# NOTES:
# `--admin-username` and `--generate-ssh-keys` are required by the az cli,
# but are not actually used by talos
# `--os-disk-size-gb` is the backing disk for Kubernetes and any workload containers
# `--boot-diagnostics-storage` is to enable console output which may be necessary
# for troubleshooting

Bootstrap Etcd

You should now be able to interact with your cluster with talosctl. We will need to discover the public IP for our first control plane node first.

CONTROL_PLANE_0_IP=$(az network public-ip show \
                    --resource-group $GROUP \
                    --name talos-controlplane-public-ip-0 \
                    --query [ipAddress] \
                    --output tsv)

Set the endpoints and nodes:

talosctl --talosconfig talosconfig config endpoint $CONTROL_PLANE_0_IP
talosctl --talosconfig talosconfig config node $CONTROL_PLANE_0_IP

Bootstrap etcd:

talosctl --talosconfig talosconfig bootstrap

Retrieve the kubeconfig

At this point we can retrieve the admin kubeconfig by running:

talosctl --talosconfig talosconfig kubeconfig .

3 - DigitalOcean

Creating a cluster via the CLI on DigitalOcean.

Creating a Talos Linux Cluster on Digital Ocean via the CLI

In this guide we will create an HA Kubernetes cluster with 1 worker node, in the NYC region. We assume an existing Space, and some familiarity with DigitalOcean. If you need more information on DigitalOcean specifics, please see the official DigitalOcean documentation.

Create the Image

Download the DigitalOcean image digital-ocean-amd64.raw.gz from the latest Talos release.

Note: the minimum version of Talos required to support Digital Ocean is v1.3.3.

Using an upload method of your choice (doctl does not have Spaces support), upload the image to a space. (It’s easy to drag the image file to the space using DigitalOcean’s web console.)

Note: Make sure you upload the file as public.

Now, create an image using the URL of the uploaded image:

export REGION=nyc3

doctl compute image create \
    --region $REGION \
    --image-description talos-digital-ocean-tutorial \
    --image-url https://$SPACENAME.$REGION.digitaloceanspaces.com/digital-ocean-amd64.raw.gz \
    Talos

Save the image ID. We will need it when creating droplets.

Create a Load Balancer

doctl compute load-balancer create \
    --region $REGION \
    --name talos-digital-ocean-tutorial-lb \
    --tag-name talos-digital-ocean-tutorial-control-plane \
    --health-check protocol:tcp,port:6443,check_interval_seconds:10,response_timeout_seconds:5,healthy_threshold:5,unhealthy_threshold:3 \
    --forwarding-rules entry_protocol:tcp,entry_port:443,target_protocol:tcp,target_port:6443

Note the returned ID of the load balancer.

We will need the IP of the load balancer. Using the ID of the load balancer, run:

doctl compute load-balancer get --format IP <load balancer ID>

Note that it may take a few minutes before the load balancer is provisioned, so repeat this command until it returns with the IP address.

Create the Machine Configuration Files

Using the IP address (or DNS name, if you have created one) of the loadbalancer, generate the base configuration files for the Talos machines. Also note that the load balancer forwards port 443 to port 6443 on the associated nodes, so we should use 443 as the port in the config definition:

$ talosctl gen config talos-k8s-digital-ocean-tutorial https://<load balancer IP or DNS>:443
created controlplane.yaml
created worker.yaml
created talosconfig

Create the Droplets

Create a dummy SSH key

Although SSH is not used by Talos, DigitalOcean requires that an SSH key be associated with a droplet during creation. We will create a dummy key that can be used to satisfy this requirement.

doctl compute ssh-key create --public-key "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDbl0I1s/yOETIKjFr7mDLp8LmJn6OIZ68ILjVCkoN6lzKmvZEqEm1YYeWoI0xgb80hQ1fKkl0usW6MkSqwrijoUENhGFd6L16WFL53va4aeJjj2pxrjOr3uBFm/4ATvIfFTNVs+VUzFZ0eGzTgu1yXydX8lZMWnT4JpsMraHD3/qPP+pgyNuI51LjOCG0gVCzjl8NoGaQuKnl8KqbSCARIpETg1mMw+tuYgaKcbqYCMbxggaEKA0ixJ2MpFC/kwm3PcksTGqVBzp3+iE5AlRe1tnbr6GhgT839KLhOB03j7lFl1K9j1bMTOEj5Io8z7xo/XeF2ZQKHFWygAJiAhmKJ dummy@dummy.local" dummy

Note the ssh key ID that is returned - we will use it in creating the droplets.

Create the Control Plane Nodes

Run the following commands to create three control plane nodes:

doctl compute droplet create \
    --region $REGION \
    --image <image ID> \
    --size s-2vcpu-4gb \
    --enable-private-networking \
    --tag-names talos-digital-ocean-tutorial-control-plane \
    --user-data-file controlplane.yaml \
    --ssh-keys <ssh key ID> \
    talos-control-plane-1
doctl compute droplet create \
    --region $REGION \
    --image <image ID> \
    --size s-2vcpu-4gb \
    --enable-private-networking \
    --tag-names talos-digital-ocean-tutorial-control-plane \
    --user-data-file controlplane.yaml \
    --ssh-keys <ssh key ID> \
    talos-control-plane-2
doctl compute droplet create \
    --region $REGION \
    --image <image ID> \
    --size s-2vcpu-4gb \
    --enable-private-networking \
    --tag-names talos-digital-ocean-tutorial-control-plane \
    --user-data-file controlplane.yaml \
    --ssh-keys <ssh key ID> \
    talos-control-plane-3

Note the droplet ID returned for the first control plane node.

Create the Worker Nodes

Run the following to create a worker node:

doctl compute droplet create \
    --region $REGION \
    --image <image ID> \
    --size s-2vcpu-4gb \
    --enable-private-networking \
    --user-data-file worker.yaml \
    --ssh-keys <ssh key ID>  \
    talos-worker-1

Bootstrap Etcd

To configure talosctl we will need the first control plane node’s IP:

doctl compute droplet get --format PublicIPv4 <droplet ID>

Set the endpoints and nodes:

talosctl --talosconfig talosconfig config endpoint <control plane 1 IP>
talosctl --talosconfig talosconfig config node <control plane 1 IP>

Bootstrap etcd:

talosctl --talosconfig talosconfig bootstrap

Retrieve the kubeconfig

At this point we can retrieve the admin kubeconfig by running:

talosctl --talosconfig talosconfig kubeconfig .

We can also watch the cluster bootstrap via:

talosctl --talosconfig talosconfig health

4 - Exoscale

Creating a cluster via the CLI using exoscale.com

Talos is known to work on exoscale.com; however, it is currently undocumented.

5 - GCP

Creating a cluster via the CLI on Google Cloud Platform.

Creating a Cluster via the CLI

In this guide, we will create an HA Kubernetes cluster in GCP with 1 worker node. We will assume an existing Cloud Storage bucket, and some familiarity with Google Cloud. If you need more information on Google Cloud specifics, please see the official Google documentation.

jq and talosctl also needs to be installed

Manual Setup

Environment Setup

We’ll make use of the following environment variables throughout the setup. Edit the variables below with your correct information.

# Storage account to use
export STORAGE_BUCKET="StorageBucketName"
# Region
export REGION="us-central1"

Create the Image

First, download the Google Cloud image from a Talos release. These images are called gcp-$ARCH.tar.gz.

Upload the Image

Once you have downloaded the image, you can upload it to your storage bucket with:

gsutil cp /path/to/gcp-amd64.tar.gz gs://$STORAGE_BUCKET

Register the image

Now that the image is present in our bucket, we’ll register it.

gcloud compute images create talos \
 --source-uri=gs://$STORAGE_BUCKET/gcp-amd64.tar.gz \
 --guest-os-features=VIRTIO_SCSI_MULTIQUEUE

Network Infrastructure

Load Balancers and Firewalls

Once the image is prepared, we’ll want to work through setting up the network. Issue the following to create a firewall, load balancer, and their required components.

130.211.0.0/22 and 35.191.0.0/16 are the GCP Load Balancer IP ranges

# Create Instance Group
gcloud compute instance-groups unmanaged create talos-ig \
  --zone $REGION-b

# Create port for IG
gcloud compute instance-groups set-named-ports talos-ig \
    --named-ports tcp6443:6443 \
    --zone $REGION-b

# Create health check
gcloud compute health-checks create tcp talos-health-check --port 6443

# Create backend
gcloud compute backend-services create talos-be \
    --global \
    --protocol TCP \
    --health-checks talos-health-check \
    --timeout 5m \
    --port-name tcp6443

# Add instance group to backend
gcloud compute backend-services add-backend talos-be \
    --global \
    --instance-group talos-ig \
    --instance-group-zone $REGION-b

# Create tcp proxy
gcloud compute target-tcp-proxies create talos-tcp-proxy \
    --backend-service talos-be \
    --proxy-header NONE

# Create LB IP
gcloud compute addresses create talos-lb-ip --global

# Forward 443 from LB IP to tcp proxy
gcloud compute forwarding-rules create talos-fwd-rule \
    --global \
    --ports 443 \
    --address talos-lb-ip \
    --target-tcp-proxy talos-tcp-proxy

# Create firewall rule for health checks
gcloud compute firewall-rules create talos-controlplane-firewall \
     --source-ranges 130.211.0.0/22,35.191.0.0/16 \
     --target-tags talos-controlplane \
     --allow tcp:6443

# Create firewall rule to allow talosctl access
gcloud compute firewall-rules create talos-controlplane-talosctl \
  --source-ranges 0.0.0.0/0 \
  --target-tags talos-controlplane \
  --allow tcp:50000

Cluster Configuration

With our networking bits setup, we’ll fetch the IP for our load balancer and create our configuration files.

LB_PUBLIC_IP=$(gcloud compute forwarding-rules describe talos-fwd-rule \
               --global \
               --format json \
               | jq -r .IPAddress)

talosctl gen config talos-k8s-gcp-tutorial https://${LB_PUBLIC_IP}:443

Additionally, you can specify --config-patch with RFC6902 jsonpatch which will be applied during the config generation.

Compute Creation

We are now ready to create our GCP nodes.

# Create the control plane nodes.
for i in $( seq 1 3 ); do
  gcloud compute instances create talos-controlplane-$i \
    --image talos \
    --zone $REGION-b \
    --tags talos-controlplane \
    --boot-disk-size 20GB \
    --metadata-from-file=user-data=./controlplane.yaml
    --tags talos-controlplane-$i
done

# Add control plane nodes to instance group
for i in $( seq 1 3 ); do
  gcloud compute instance-groups unmanaged add-instances talos-ig \
      --zone $REGION-b \
      --instances talos-controlplane-$i
done

# Create worker
gcloud compute instances create talos-worker-0 \
  --image talos \
  --zone $REGION-b \
  --boot-disk-size 20GB \
  --metadata-from-file=user-data=./worker.yaml
  --tags talos-worker-$i

Bootstrap Etcd

You should now be able to interact with your cluster with talosctl. We will need to discover the public IP for our first control plane node first.

CONTROL_PLANE_0_IP=$(gcloud compute instances describe talos-controlplane-0 \
                     --zone $REGION-b \
                     --format json \
                     | jq -r '.networkInterfaces[0].accessConfigs[0].natIP')

Set the endpoints and nodes:

talosctl --talosconfig talosconfig config endpoint $CONTROL_PLANE_0_IP
talosctl --talosconfig talosconfig config node $CONTROL_PLANE_0_IP

Bootstrap etcd:

talosctl --talosconfig talosconfig bootstrap

Retrieve the kubeconfig

At this point we can retrieve the admin kubeconfig by running:

talosctl --talosconfig talosconfig kubeconfig .

Cleanup

# cleanup VM's
gcloud compute instances delete \
  talos-worker-0 \
  talos-controlplane-0 \
  talos-controlplane-1 \
  talos-controlplane-2

# cleanup firewall rules
gcloud compute firewall-rules delete \
  talos-controlplane-talosctl \
  talos-controlplane-firewall

# cleanup forwarding rules
gcloud compute forwarding-rules delete \
  talos-fwd-rule

# cleanup addresses
gcloud compute addresses delete \
  talos-lb-ip

# cleanup proxies
gcloud compute target-tcp-proxies delete \
  talos-tcp-proxy

# cleanup backend services
gcloud compute backend-services delete \
  talos-be

# cleanup health checks
gcloud compute health-checks delete \
  talos-health-check

# cleanup unmanaged instance groups
gcloud compute instance-groups unmanaged delete \
  talos-ig

# cleanup Talos image
gcloud compute images delete \
  talos

Using GCP Deployment manager

Using GCP deployment manager automatically creates a Google Storage bucket and uploads the Talos image to it. Once the deployment is complete the generated talosconfig and kubeconfig files are uploaded to the bucket.

By default this setup creates a three node control plane and a single worker in us-west1-b

First we need to create a folder to store our deployment manifests and perform all subsequent operations from that folder.

mkdir -p talos-gcp-deployment
cd talos-gcp-deployment

Getting the deployment manifests

We need to download two deployment manifests for the deployment from the Talos github repository.

curl -fsSLO "https://raw.githubusercontent.com/siderolabs/talos/master/website/content/v1.3/talos-guides/install/cloud-platforms/gcp/config.yaml"
curl -fsSLO "https://raw.githubusercontent.com/siderolabs/talos/master/website/content/v1.3/talos-guides/install/cloud-platforms/gcp/talos-ha.jinja"
# if using ccm
curl -fsSLO "https://raw.githubusercontent.com/siderolabs/talos/master/website/content/v1.3/talos-guides/install/cloud-platforms/gcp/gcp-ccm.yaml"

Updating the config

Now we need to update the local config.yaml file with any required changes such as changing the default zone, Talos version, machine sizes, nodes count etc.

An example config.yaml file is shown below:

imports:
  - path: talos-ha.jinja

resources:
  - name: talos-ha
    type: talos-ha.jinja
    properties:
      zone: us-west1-b
      talosVersion: v1.3
      externalCloudProvider: false
      controlPlaneNodeCount: 5
      controlPlaneNodeType: n1-standard-1
      workerNodeCount: 3
      workerNodeType: n1-standard-1
outputs:
  - name: bucketName
    value: $(ref.talos-ha.bucketName)

Enabling external cloud provider

Note: The externalCloudProvider property is set to false by default. The manifest used for deploying the ccm (cloud controller manager) is currently using the GCP ccm provided by openshift since there are no public images for the ccm yet.

Since the routes controller is disabled while deploying the CCM, the CNI pods needs to be restarted after the CCM deployment is complete to remove the node.kubernetes.io/network-unavailable taint. See Nodes network-unavailable taint not removed after installing ccm for more information

Use a custom built image for the ccm deployment if required.

Creating the deployment

Now we are ready to create the deployment. Confirm with y for any prompts. Run the following command to create the deployment:

# use a unique name for the deployment, resources are prefixed with the deployment name
export DEPLOYMENT_NAME="<deployment name>"
gcloud deployment-manager deployments create "${DEPLOYMENT_NAME}" --config config.yaml

Retrieving the outputs

First we need to get the deployment outputs.

# first get the outputs
OUTPUTS=$(gcloud deployment-manager deployments describe "${DEPLOYMENT_NAME}" --format json | jq '.outputs[]')

BUCKET_NAME=$(jq -r '. | select(.name == "bucketName").finalValue' <<< "${OUTPUTS}")
# used when cloud controller is enabled
SERVICE_ACCOUNT=$(jq -r '. | select(.name == "serviceAccount").finalValue' <<< "${OUTPUTS}")
PROJECT=$(jq -r '. | select(.name == "project").finalValue' <<< "${OUTPUTS}")

Note: If cloud controller manager is enabled, the below command needs to be run to allow the controller custom role to access cloud resources

gcloud projects add-iam-policy-binding \
    "${PROJECT}" \
    --member "serviceAccount:${SERVICE_ACCOUNT}" \
    --role roles/iam.serviceAccountUser

gcloud projects add-iam-policy-binding \
    "${PROJECT}" \
    --member serviceAccount:"${SERVICE_ACCOUNT}" \
    --role roles/compute.admin

gcloud projects add-iam-policy-binding \
    "${PROJECT}" \
    --member serviceAccount:"${SERVICE_ACCOUNT}" \
    --role roles/compute.loadBalancerAdmin

Downloading talos and kube config

In addition to the talosconfig and kubeconfig files, the storage bucket contains the controlplane.yaml and worker.yaml files used to join additional nodes to the cluster.

gsutil cp "gs://${BUCKET_NAME}/generated/talosconfig" .
gsutil cp "gs://${BUCKET_NAME}/generated/kubeconfig" .

Deploying the cloud controller manager

kubectl \
  --kubeconfig kubeconfig \
  --namespace kube-system \
  apply \
  --filename gcp-ccm.yaml
#  wait for the ccm to be up
kubectl \
  --kubeconfig kubeconfig \
  --namespace kube-system \
  rollout status \
  daemonset cloud-controller-manager

If the cloud controller manager is enabled, we need to restart the CNI pods to remove the node.kubernetes.io/network-unavailable taint.

# restart the CNI pods, in this case flannel
kubectl \
  --kubeconfig kubeconfig \
  --namespace kube-system \
  rollout restart \
  daemonset kube-flannel
# wait for the pods to be restarted
kubectl \
  --kubeconfig kubeconfig \
  --namespace kube-system \
  rollout status \
  daemonset kube-flannel

Check cluster status

kubectl \
  --kubeconfig kubeconfig \
  get nodes

Cleanup deployment

Warning: This will delete the deployment and all resources associated with it.

Run below if cloud controller manager is enabled

gcloud projects remove-iam-policy-binding \
    "${PROJECT}" \
    --member "serviceAccount:${SERVICE_ACCOUNT}" \
    --role roles/iam.serviceAccountUser

gcloud projects remove-iam-policy-binding \
    "${PROJECT}" \
    --member serviceAccount:"${SERVICE_ACCOUNT}" \
    --role roles/compute.admin

gcloud projects remove-iam-policy-binding \
    "${PROJECT}" \
    --member serviceAccount:"${SERVICE_ACCOUNT}" \
    --role roles/compute.loadBalancerAdmin

Now we can finally remove the deployment

# delete the objects in the bucket first
gsutil -m rm -r "gs://${BUCKET_NAME}"
gcloud deployment-manager deployments delete "${DEPLOYMENT_NAME}" --quiet

6 - Hetzner

Creating a cluster via the CLI (hcloud) on Hetzner.

Upload image

Hetzner Cloud does not support uploading custom images. You can email their support to get a Talos ISO uploaded by following issues:3599 or you can prepare image snapshot by yourself.

There are two options to upload your own.

  1. Run an instance in rescue mode and replace the system OS with the Talos image
  2. Use Hashicorp packer to prepare an image

Rescue mode

Create a new Server in the Hetzner console. Enable the Hetzner Rescue System for this server and reboot. Upon a reboot, the server will boot a special minimal Linux distribution designed for repair and reinstall. Once running, login to the server using ssh to prepare the system disk by doing the following:

# Check that you in Rescue mode
df

### Result is like:
# udev                   987432         0    987432   0% /dev
# 213.133.99.101:/nfs 308577696 247015616  45817536  85% /root/.oldroot/nfs
# overlay                995672      8340    987332   1% /
# tmpfs                  995672         0    995672   0% /dev/shm
# tmpfs                  398272       572    397700   1% /run
# tmpfs                    5120         0      5120   0% /run/lock
# tmpfs                  199132         0    199132   0% /run/user/0

# Download the Talos image
cd /tmp
wget -O /tmp/talos.raw.xz https://github.com/siderolabs/talos/releases/download/v1.3.7/hcloud-amd64.raw.xz
# Replace system
xz -d -c /tmp/talos.raw.xz | dd of=/dev/sda && sync
# shutdown the instance
shutdown -h now

To make sure disk content is consistent, it is recommended to shut the server down before taking an image (snapshot). Once shutdown, simply create an image (snapshot) from the console. You can now use this snapshot to run Talos on the cloud.

Packer

Install packer to the local machine.

Create a config file for packer to use:

# hcloud.pkr.hcl

packer {
  required_plugins {
    hcloud = {
      version = ">= 1.0.0"
      source  = "github.com/hashicorp/hcloud"
    }
  }
}

variable "talos_version" {
  type    = string
  default = "v1.3.7"
}

locals {
  image = "https://github.com/siderolabs/talos/releases/download/${var.talos_version}/hcloud-amd64.raw.xz"
}

source "hcloud" "talos" {
  rescue       = "linux64"
  image        = "debian-11"
  location     = "hel1"
  server_type  = "cx11"
  ssh_username = "root"

  snapshot_name = "talos system disk"
  snapshot_labels = {
    type    = "infra",
    os      = "talos",
    version = "${var.talos_version}",
  }
}

build {
  sources = ["source.hcloud.talos"]

  provisioner "shell" {
    inline = [
      "apt-get install -y wget",
      "wget -O /tmp/talos.raw.xz ${local.image}",
      "xz -d -c /tmp/talos.raw.xz | dd of=/dev/sda && sync",
    ]
  }
}

Create a new image by issuing the commands shown below. Note that to create a new API token for your Project, switch into the Hetzner Cloud Console choose a Project, go to Access → Security, and create a new token.

# First you need set API Token
export HCLOUD_TOKEN=${TOKEN}

# Upload image
packer init .
packer build .
# Save the image ID
export IMAGE_ID=<image-id-in-packer-output>

After doing this, you can find the snapshot in the console interface.

Creating a Cluster via the CLI

This section assumes you have the hcloud console utility on your local machine.

# Set hcloud context and api key
hcloud context create talos-tutorial

Create a Load Balancer

Create a load balancer by issuing the commands shown below. Save the IP/DNS name, as this info will be used in the next step.

hcloud load-balancer create --name controlplane --network-zone eu-central --type lb11 --label 'type=controlplane'

### Result is like:
# LoadBalancer 484487 created
# IPv4: 49.12.X.X
# IPv6: 2a01:4f8:X:X::1

hcloud load-balancer add-service controlplane \
    --listen-port 6443 --destination-port 6443 --protocol tcp
hcloud load-balancer add-target controlplane \
    --label-selector 'type=controlplane'

Create the Machine Configuration Files

Generating Base Configurations

Using the IP/DNS name of the loadbalancer created earlier, generate the base configuration files for the Talos machines by issuing:

$ talosctl gen config talos-k8s-hcloud-tutorial https://<load balancer IP or DNS>:6443
created controlplane.yaml
created worker.yaml
created talosconfig

At this point, you can modify the generated configs to your liking. Optionally, you can specify --config-patch with RFC6902 jsonpatches which will be applied during the config generation.

Validate the Configuration Files

Validate any edited machine configs with:

$ talosctl validate --config controlplane.yaml --mode cloud
controlplane.yaml is valid for cloud mode
$ talosctl validate --config worker.yaml --mode cloud
worker.yaml is valid for cloud mode

Create the Servers

We can now create our servers. Note that you can find IMAGE_ID in the snapshot section of the console: https://console.hetzner.cloud/projects/$PROJECT_ID/servers/snapshots.

Create the Control Plane Nodes

Create the control plane nodes with:

export IMAGE_ID=<your-image-id>

hcloud server create --name talos-control-plane-1 \
    --image ${IMAGE_ID} \
    --type cx21 --location hel1 \
    --label 'type=controlplane' \
    --user-data-from-file controlplane.yaml

hcloud server create --name talos-control-plane-2 \
    --image ${IMAGE_ID} \
    --type cx21 --location fsn1 \
    --label 'type=controlplane' \
    --user-data-from-file controlplane.yaml

hcloud server create --name talos-control-plane-3 \
    --image ${IMAGE_ID} \
    --type cx21 --location nbg1 \
    --label 'type=controlplane' \
    --user-data-from-file controlplane.yaml

Create the Worker Nodes

Create the worker nodes with the following command, repeating (and incrementing the name counter) as many times as desired.

hcloud server create --name talos-worker-1 \
    --image ${IMAGE_ID} \
    --type cx21 --location hel1 \
    --label 'type=worker' \
    --user-data-from-file worker.yaml

Bootstrap Etcd

To configure talosctl we will need the first control plane node’s IP. This can be found by issuing:

hcloud server list | grep talos-control-plane

Set the endpoints and nodes for your talosconfig with:

talosctl --talosconfig talosconfig config endpoint <control-plane-1-IP>
talosctl --talosconfig talosconfig config node <control-plane-1-IP>

Bootstrap etcd on the first control plane node with:

talosctl --talosconfig talosconfig bootstrap

Retrieve the kubeconfig

At this point we can retrieve the admin kubeconfig by running:

talosctl --talosconfig talosconfig kubeconfig .

7 - Nocloud

Creating a cluster via the CLI using qemu.

Talos supports nocloud data source implementation.

There are two ways to configure Talos server with nocloud platform:

  • via SMBIOS “serial number” option
  • using CDROM or USB-flash filesystem

Note: This requires the nocloud image which can be found on the Github Releases page.

SMBIOS Serial Number

This method requires the network connection to be up (e.g. via DHCP). Configuration is delivered from the HTTP server.

ds=nocloud-net;s=http://10.10.0.1/configs/;h=HOSTNAME

After the network initialization is complete, Talos fetches:

  • the machine config from http://10.10.0.1/configs/user-data
  • the network config (if available) from http://10.10.0.1/configs/network-config

SMBIOS: QEMU

Add the following flag to qemu command line when starting a VM:

qemu-system-x86_64 \
  ...\
  -smbios type=1,serial=ds=nocloud-net;s=http://10.10.0.1/configs/

SMBIOS: Proxmox

Set the source machine config through the serial number on Proxmox GUI.

The Proxmox stores the VM config at /etc/pve/qemu-server/$ID.conf ($ID - VM ID number of virtual machine), you will see something like:

...
smbios1: uuid=ceae4d10,serial=ZHM9bm9jbG91ZC1uZXQ7cz1odHRwOi8vMTAuMTAuMC4xL2NvbmZpZ3Mv,base64=1
...

Where serial holds the base64-encoded string version of ds=nocloud-net;s=http://10.10.0.1/configs/.

CDROM/USB

Talos can also get machine config from local attached storage without any prior network connection being established.

You can provide configs to the server via files on a VFAT or ISO9660 filesystem. The filesystem volume label must be cidata or CIDATA.

Example: QEMU

Create and prepare Talos machine config:

export CONTROL_PLANE_IP=192.168.1.10

talosctl gen config talos-nocloud https://$CONTROL_PLANE_IP:6443 --output-dir _out

Prepare cloud-init configs:

mkdir -p iso
mv _out/controlplane.yaml iso/user-data
echo "local-hostname: controlplane-1" > iso/meta-data
cat > iso/network-config << EOF
version: 1
config:
   - type: physical
     name: eth0
     mac_address: "52:54:00:12:34:00"
     subnets:
        - type: static
          address: 192.168.1.10
          netmask: 255.255.255.0
          gateway: 192.168.1.254
EOF

Create cloud-init iso image

cd iso && genisoimage -output cidata.iso -V cidata -r -J user-data meta-data network-config

Start the VM

qemu-system-x86_64 \
    ...
    -cdrom iso/cidata.iso \
    ...

Example: Proxmox

Proxmox can create cloud-init disk for you. Edit the cloud-init config information in Proxmox as follows, substitute your own information as necessary:

and then update cicustom param at /etc/pve/qemu-server/$ID.conf.

cicustom: user=local:snippets/controlplane-1.yml
ipconfig0: ip=192.168.1.10/24,gw=192.168.10.254
nameserver: 1.1.1.1
searchdomain: local

Note: snippets/controlplane-1.yml is Talos machine config. It is usually located at /var/lib/vz/snippets/controlplane-1.yml. This file must be placed to this path manually, as Proxmox does not support snippet uploading via API/GUI.

Click on Regenerate Image button after the above changes are made.

8 - OpenStack

Creating a cluster via the CLI on OpenStack.

Creating a Cluster via the CLI

In this guide, we will create an HA Kubernetes cluster in OpenStack with 1 worker node. We will assume an existing some familiarity with OpenStack. If you need more information on OpenStack specifics, please see the official OpenStack documentation.

Environment Setup

You should have an existing openrc file. This file will provide environment variables necessary to talk to your OpenStack cloud. See here for instructions on fetching this file.

Create the Image

First, download the OpenStack image from a Talos release. These images are called openstack-$ARCH.tar.gz. Untar this file with tar -xvf openstack-$ARCH.tar.gz. The resulting file will be called disk.raw.

Upload the Image

Once you have the image, you can upload to OpenStack with:

openstack image create --public --disk-format raw --file disk.raw talos

Network Infrastructure

Load Balancer and Network Ports

Once the image is prepared, you will need to work through setting up the network. Issue the following to create a load balancer, the necessary network ports for each control plane node, and associations between the two.

Creating loadbalancer:

# Create load balancer, updating vip-subnet-id if necessary
openstack loadbalancer create --name talos-control-plane --vip-subnet-id public

# Create listener
openstack loadbalancer listener create --name talos-control-plane-listener --protocol TCP --protocol-port 6443 talos-control-plane

# Pool and health monitoring
openstack loadbalancer pool create --name talos-control-plane-pool --lb-algorithm ROUND_ROBIN --listener talos-control-plane-listener --protocol TCP
openstack loadbalancer healthmonitor create --delay 5 --max-retries 4 --timeout 10 --type TCP talos-control-plane-pool

Creating ports:

# Create ports for control plane nodes, updating network name if necessary
openstack port create --network shared talos-control-plane-1
openstack port create --network shared talos-control-plane-2
openstack port create --network shared talos-control-plane-3

# Create floating IPs for the ports, so that you will have talosctl connectivity to each control plane
openstack floating ip create --port talos-control-plane-1 public
openstack floating ip create --port talos-control-plane-2 public
openstack floating ip create --port talos-control-plane-3 public

Note: Take notice of the private and public IPs associated with each of these ports, as they will be used in the next step. Additionally, take node of the port ID, as it will be used in server creation.

Associate port’s private IPs to loadbalancer:

# Create members for each port IP, updating subnet-id and address as necessary.
openstack loadbalancer member create --subnet-id shared-subnet --address <PRIVATE IP OF talos-control-plane-1 PORT> --protocol-port 6443 talos-control-plane-pool
openstack loadbalancer member create --subnet-id shared-subnet --address <PRIVATE IP OF talos-control-plane-2 PORT> --protocol-port 6443 talos-control-plane-pool
openstack loadbalancer member create --subnet-id shared-subnet --address <PRIVATE IP OF talos-control-plane-3 PORT> --protocol-port 6443 talos-control-plane-pool

Security Groups

This example uses the default security group in OpenStack. Ports have been opened to ensure that connectivity from both inside and outside the group is possible. You will want to allow, at a minimum, ports 6443 (Kubernetes API server) and 50000 (Talos API) from external sources. It is also recommended to allow communication over all ports from within the subnet.

Cluster Configuration

With our networking bits setup, we’ll fetch the IP for our load balancer and create our configuration files.

LB_PUBLIC_IP=$(openstack loadbalancer show talos-control-plane -f json | jq -r .vip_address)

talosctl gen config talos-k8s-openstack-tutorial https://${LB_PUBLIC_IP}:6443

Additionally, you can specify --config-patch with RFC6902 jsonpatch which will be applied during the config generation.

Compute Creation

We are now ready to create our OpenStack nodes.

Create control plane:

# Create control planes 2 and 3, substituting the same info.
for i in $( seq 1 3 ); do
  openstack server create talos-control-plane-$i --flavor m1.small --nic port-id=talos-control-plane-$i --image talos --user-data /path/to/controlplane.yaml
done

Create worker:

# Update network name as necessary.
openstack server create talos-worker-1 --flavor m1.small --network shared --image talos --user-data /path/to/worker.yaml

Note: This step can be repeated to add more workers.

Bootstrap Etcd

You should now be able to interact with your cluster with talosctl. We will use one of the floating IPs we allocated earlier. It does not matter which one.

Set the endpoints and nodes:

talosctl --talosconfig talosconfig config endpoint <control plane 1 IP>
talosctl --talosconfig talosconfig config node <control plane 1 IP>

Bootstrap etcd:

talosctl --talosconfig talosconfig bootstrap

Retrieve the kubeconfig

At this point we can retrieve the admin kubeconfig by running:

talosctl --talosconfig talosconfig kubeconfig .

9 - Oracle

Creating a cluster via the CLI (oci) on OracleCloud.com.

Upload image

Oracle Cloud at the moment does not have a Talos official image. So you can use Bring Your Own Image (BYOI) approach.

Once the image is uploaded, set the Boot volume type to Paravirtualized mode.

OracleCloud has highly available NTP service, it can be enabled in Talos machine config with:

machine:
  time:
    servers:
      - 169.254.169.254

Creating a Cluster via the CLI

Login to the console. And open the Cloud Shell.

Create a network

export cidr_block=10.0.0.0/16
export subnet_block=10.0.0.0/24
export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/network/vcn/create.html#cmdoption-compartment-id

export vcn_id=$(oci network vcn create --cidr-block $cidr_block --display-name talos-example --compartment-id $compartment_id --query data.id --raw-output)
export rt_id=$(oci network subnet create --cidr-block $subnet_block --display-name kubernetes --compartment-id $compartment_id --vcn-id $vcn_id --query data.route-table-id --raw-output)
export ig_id=$(oci network internet-gateway create --compartment-id $compartment_id --is-enabled true --vcn-id $vcn_id --query data.id --raw-output)

oci network route-table update --rt-id $rt_id --route-rules "[{\"cidrBlock\":\"0.0.0.0/0\",\"networkEntityId\":\"$ig_id\"}]" --force

# disable firewall
export sl_id=$(oci network vcn list --compartment-id $compartment_id --query 'data[0]."default-security-list-id"' --raw-output)

oci network security-list update --security-list-id $sl_id --egress-security-rules '[{"destination": "0.0.0.0/0", "protocol": "all", "isStateless": false}]' --ingress-security-rules '[{"source": "0.0.0.0/0", "protocol": "all", "isStateless": false}]' --force

Create a Load Balancer

Create a load balancer by issuing the commands shown below. Save the IP/DNS name, as this info will be used in the next step.

export subnet_id=$(oci network subnet list --compartment-id=$compartment_id --display-name kubernetes --query data[0].id --raw-output)
export network_load_balancer_id=$(oci nlb network-load-balancer create --compartment-id $compartment_id --display-name controlplane-lb --subnet-id $subnet_id --is-preserve-source-destination false --is-private false --query data.id --raw-output)

cat <<EOF > talos-health-checker.json
{
  "intervalInMillis": 10000,
  "port": 50000,
  "protocol": "TCP"
}
EOF

oci nlb backend-set create --health-checker file://talos-health-checker.json --name talos --network-load-balancer-id $network_load_balancer_id --policy TWO_TUPLE --is-preserve-source false
oci nlb listener create --default-backend-set-name talos --name talos --network-load-balancer-id $network_load_balancer_id --port 50000 --protocol TCP

cat <<EOF > controlplane-health-checker.json
{
  "intervalInMillis": 10000,
  "port": 6443,
  "protocol": "HTTPS",
  "returnCode": 200,
  "urlPath": "/readyz"
}
EOF

oci nlb backend-set create --health-checker file://controlplane-health-checker.json --name controlplane --network-load-balancer-id $network_load_balancer_id --policy TWO_TUPLE --is-preserve-source false
oci nlb listener create --default-backend-set-name controlplane --name controlplane --network-load-balancer-id $network_load_balancer_id --port 6443 --protocol TCP

# Save the external IP
oci nlb network-load-balancer list --compartment-id $compartment_id --display-name controlplane-lb --query 'data.items[0]."ip-addresses"'

Create the Machine Configuration Files

Generating Base Configurations

Using the IP/DNS name of the loadbalancer created earlier, generate the base configuration files for the Talos machines by issuing:

$ talosctl gen config talos-k8s-oracle-tutorial https://<load balancer IP or DNS>:6443 --additional-sans <load balancer IP or DNS>
created controlplane.yaml
created worker.yaml
created talosconfig

At this point, you can modify the generated configs to your liking. Optionally, you can specify --config-patch with RFC6902 jsonpatches which will be applied during the config generation.

Validate the Configuration Files

Validate any edited machine configs with:

$ talosctl validate --config controlplane.yaml --mode cloud
controlplane.yaml is valid for cloud mode
$ talosctl validate --config worker.yaml --mode cloud
worker.yaml is valid for cloud mode

Create the Servers

Create the Control Plane Nodes

Create the control plane nodes with:

export shape='VM.Standard.A1.Flex'
export subnet_id=$(oci network subnet list --compartment-id=$compartment_id --display-name kubernetes --query data[0].id --raw-output)
export image_id=$(oci compute image list --compartment-id $compartment_id --shape $shape --operating-system Talos --limit 1 --query data[0].id --raw-output)
export availability_domain=$(oci iam availability-domain list --compartment-id=$compartment_id --query data[0].name --raw-output)
export network_load_balancer_id=$(oci nlb network-load-balancer list --compartment-id $compartment_id --display-name controlplane-lb --query 'data.items[0].id' --raw-output)

cat <<EOF > shape.json
{
  "memoryInGBs": 4,
  "ocpus": 1
}
EOF

export instance_id=$(oci compute instance launch --shape $shape --shape-config file://shape.json --availability-domain $availability_domain --compartment-id $compartment_id --image-id $image_id --subnet-id $subnet_id --display-name controlplane-1 --private-ip 10.0.0.11 --assign-public-ip true --launch-options '{"networkType":"PARAVIRTUALIZED"}' --user-data-file controlplane.yaml --query 'data.id' --raw-output)

oci nlb backend create --backend-set-name talos --network-load-balancer-id $network_load_balancer_id --port 50000 --target-id $instance_id
oci nlb backend create --backend-set-name controlplane --network-load-balancer-id $network_load_balancer_id --port 6443 --target-id $instance_id

export instance_id=$(oci compute instance launch --shape $shape --shape-config file://shape.json --availability-domain $availability_domain --compartment-id $compartment_id --image-id $image_id --subnet-id $subnet_id --display-name controlplane-2 --private-ip 10.0.0.12 --assign-public-ip true --launch-options '{"networkType":"PARAVIRTUALIZED"}' --user-data-file controlplane.yaml --query 'data.id' --raw-output)

oci nlb backend create --backend-set-name talos --network-load-balancer-id $network_load_balancer_id --port 50000 --target-id $instance_id
oci nlb backend create --backend-set-name controlplane --network-load-balancer-id $network_load_balancer_id --port 6443 --target-id $instance_id

export instance_id=$(oci compute instance launch --shape $shape --shape-config file://shape.json --availability-domain $availability_domain --compartment-id $compartment_id --image-id $image_id --subnet-id $subnet_id --display-name controlplane-3 --private-ip 10.0.0.13 --assign-public-ip true --launch-options '{"networkType":"PARAVIRTUALIZED"}' --user-data-file controlplane.yaml --query 'data.id' --raw-output)

oci nlb backend create --backend-set-name talos --network-load-balancer-id $network_load_balancer_id --port 50000 --target-id $instance_id
oci nlb backend create --backend-set-name controlplane --network-load-balancer-id $network_load_balancer_id --port 6443 --target-id $instance_id

Create the Worker Nodes

Create the worker nodes with the following command, repeating (and incrementing the name counter) as many times as desired.

export subnet_id=$(oci network subnet list --compartment-id=$compartment_id --display-name kubernetes --query data[0].id --raw-output)
export image_id=$(oci compute image list --compartment-id $compartment_id --operating-system Talos --limit 1 --query data[0].id --raw-output)
export availability_domain=$(oci iam availability-domain list --compartment-id=$compartment_id --query data[0].name --raw-output)
export shape='VM.Standard.E2.1.Micro'

oci compute instance launch --shape $shape --availability-domain $availability_domain --compartment-id $compartment_id --image-id $image_id --subnet-id $subnet_id --display-name worker-1 --assign-public-ip true --user-data-file worker.yaml

oci compute instance launch --shape $shape --availability-domain $availability_domain --compartment-id $compartment_id --image-id $image_id --subnet-id $subnet_id --display-name worker-2 --assign-public-ip true --user-data-file worker.yaml

oci compute instance launch --shape $shape --availability-domain $availability_domain --compartment-id $compartment_id --image-id $image_id --subnet-id $subnet_id --display-name worker-3 --assign-public-ip true --user-data-file worker.yaml

Bootstrap Etcd

To configure talosctl we will need the first control plane node’s IP. This can be found by issuing:

export instance_id=$(oci compute instance list --compartment-id $compartment_id --display-name controlplane-1 --query 'data[0].id' --raw-output)

oci compute instance list-vnics --instance-id $instance_id --query 'data[0]."private-ip"' --raw-output

Set the endpoints and nodes for your talosconfig with:

talosctl --talosconfig talosconfig config endpoint <load balancer IP or DNS>
talosctl --talosconfig talosconfig config node <control-plane-1-IP>

Bootstrap etcd on the first control plane node with:

talosctl --talosconfig talosconfig bootstrap

Retrieve the kubeconfig

At this point we can retrieve the admin kubeconfig by running:

talosctl --talosconfig talosconfig kubeconfig .

10 - Scaleway

Creating a cluster via the CLI (scw) on scaleway.com.

Talos is known to work on scaleway.com; however, it is currently undocumented.

11 - UpCloud

Creating a cluster via the CLI (upctl) on UpCloud.com.

In this guide we will create an HA Kubernetes cluster 3 control plane nodes and 1 worker node. We assume some familiarity with UpCloud. If you need more information on UpCloud specifics, please see the official UpCloud documentation.

Create the Image

The best way to create an image for UpCloud, is to build one using Hashicorp packer, with the upcloud-amd64.raw.xz image found on the Talos Releases. Using the general ISO is also possible, but the UpCloud image has some UpCloud specific features implemented, such as the fetching of metadata and user data to configure the nodes.

To create the cluster, you need a few things locally installed:

  1. UpCloud CLI
  2. Hashicorp Packer

NOTE: Make sure your account allows API connections. To do so, log into UpCloud control panel and go to People -> Account -> Permissions -> Allow API connections checkbox. It is recommended to create a separate subaccount for your API access and only set the API permission.

To use the UpCloud CLI, you need to create a config in $HOME/.config/upctl.yaml

username: your_upcloud_username
password: your_upcloud_password

To use the UpCloud packer plugin, you need to also export these credentials to your environment variables, by e.g. putting the following in your .bashrc or .zshrc

export UPCLOUD_USERNAME="<username>"
export UPCLOUD_PASSWORD="<password>"

Next create a config file for packer to use:

# upcloud.pkr.hcl

packer {
  required_plugins {
    upcloud = {
      version = ">=v1.0.0"
      source  = "github.com/UpCloudLtd/upcloud"
    }
  }
}

variable "talos_version" {
  type    = string
  default = "v1.3.7"
}

locals {
  image = "https://github.com/siderolabs/talos/releases/download/${var.talos_version}/upcloud-amd64.raw.xz"
}

variable "username" {
  type        = string
  description = "UpCloud API username"
  default     = "${env("UPCLOUD_USERNAME")}"
}

variable "password" {
  type        = string
  description = "UpCloud API password"
  default     = "${env("UPCLOUD_PASSWORD")}"
  sensitive   = true
}

source "upcloud" "talos" {
  username        = "${var.username}"
  password        = "${var.password}"
  zone            = "us-nyc1"
  storage_name    = "Debian GNU/Linux 11 (Bullseye)"
  template_name   = "Talos (${var.talos_version})"
}

build {
  sources = ["source.upcloud.talos"]

  provisioner "shell" {
    inline = [
      "apt-get install -y wget xz-utils",
      "wget -q -O /tmp/talos.raw.xz ${local.image}",
      "xz -d -c /tmp/talos.raw.xz | dd of=/dev/vda",
    ]
  }

  provisioner "shell-local" {
      inline = [
      "upctl server stop --type hard custom",
      ]
  }
}

Now create a new image by issuing the commands shown below.

packer init .
packer build .

After doing this, you can find the custom image in the console interface under storage.

Creating a Cluster via the CLI

Create an Endpoint

To communicate with the Talos cluster you will need a single endpoint that is used to access the cluster. This can either be a loadbalancer that will sit in front of all your control plane nodes, a DNS name with one or more A or AAAA records pointing to the control plane nodes, or directly the IP of a control plane node.

Which option is best for you will depend on your needs. Endpoint selection has been further documented here.

After you decide on which endpoint to use, note down the domain name or IP, as we will need it in the next step.

Create the Machine Configuration Files

Generating Base Configurations

Using the DNS name of the endpoint created earlier, generate the base configuration files for the Talos machines:

$ talosctl gen config talos-upcloud-tutorial https://<load balancer IP or DNS>:<port> --install-disk /dev/vda
created controlplane.yaml
created worker.yaml
created talosconfig

At this point, you can modify the generated configs to your liking. Depending on the Kubernetes version you want to run, you might need to select a different Talos version, as not all versions are compatible. You can find the support matrix here.

Optionally, you can specify --config-patch with RFC6902 jsonpatch or yamlpatch which will be applied during the config generation.

Validate the Configuration Files

$ talosctl validate --config controlplane.yaml --mode cloud
controlplane.yaml is valid for cloud mode
$ talosctl validate --config worker.yaml --mode cloud
worker.yaml is valid for cloud mode

Create the Servers

Create the Control Plane Nodes

Run the following to create three total control plane nodes:

for ID in $(seq 3); do
    upctl server create \
      --zone us-nyc1 \
      --title talos-us-nyc1-master-$ID \
      --hostname talos-us-nyc1-master-$ID \
      --plan 2xCPU-4GB \
      --os "Talos (v1.3.7)" \
      --user-data "$(cat controlplane.yaml)" \
      --enable-metada
done

Note: modify the zone and OS depending on your preferences. The OS should match the template name generated with packer in the previous step.

Note the IP address of the first control plane node, as we will need it later.

Create the Worker Nodes

Run the following to create a worker node:

upctl server create \
  --zone us-nyc1 \
  --title talos-us-nyc1-worker-1 \
  --hostname talos-us-nyc1-worker-1 \
  --plan 2xCPU-4GB \
  --os "Talos (v1.3.7)" \
  --user-data "$(cat worker.yaml)" \
  --enable-metada

Bootstrap Etcd

To configure talosctl we will need the first control plane node’s IP, as noted earlier. We only add one node IP, as that is the entry into our cluster against which our commands will be run. All requests to other nodes are proxied through the endpoint, and therefore not all nodes need to be manually added to the config. You don’t want to run your commands against all nodes, as this can destroy your cluster if you are not careful (further documentation).

Set the endpoints and nodes:

talosctl --talosconfig talosconfig config endpoint <control plane 1 IP>
talosctl --talosconfig talosconfig config node <control plane 1 IP>

Bootstrap etcd:

talosctl --talosconfig talosconfig bootstrap

Retrieve the kubeconfig

At this point we can retrieve the admin kubeconfig by running:

talosctl --talosconfig talosconfig kubeconfig

It will take a few minutes before Kubernetes has been fully bootstrapped, and is accessible.

You can check if the nodes are registered in Talos by running

talosctl --talosconfig talosconfig get members

To check if your nodes are ready, run

kubectl get nodes

12 - Vultr

Creating a cluster via the CLI (vultr-cli) on Vultr.com.

Creating a Cluster using the Vultr CLI

This guide will demonstrate how to create a highly-available Kubernetes cluster with one worker using the Vultr cloud provider.

Vultr have a very well documented REST API, and an open-source CLI tool to interact with the API which will be used in this guide. Make sure to follow installation and authentication instructions for the vultr-cli tool.

Upload image

First step is to make the Talos ISO available to Vultr by uploading the latest release of the ISO to the Vultr ISO server.

vultr-cli iso create --url https://github.com/siderolabs/talos/releases/download/v1.3.7/talos-amd64.iso

Make a note of the ID in the output, it will be needed later when creating the instances.

Create a Load Balancer

A load balancer is needed to serve as the Kubernetes endpoint for the cluster.

vultr-cli load-balancer create \
   --region $REGION \
   --label "Talos Kubernetes Endpoint" \
   --port 6443 \
   --protocol tcp \
   --check-interval 10 \
   --response-timeout 5 \
   --healthy-threshold 5 \
   --unhealthy-threshold 3 \
   --forwarding-rules frontend_protocol:tcp,frontend_port:443,backend_protocol:tcp,backend_port:6443

Make a note of the ID of the load balancer from the output of the above command, it will be needed after the control plane instances are created.

vultr-cli load-balancer get $LOAD_BALANCER_ID | grep ^IP

Make a note of the IP address, it will be needed later when generating the configuration.

Create the Machine Configuration

Generate Base Configuration

Using the IP address (or DNS name if one was created) of the load balancer created above, generate the machine configuration files for the new cluster.

talosctl gen config talos-kubernetes-vultr https://$LOAD_BALANCER_ADDRESS

Once generated, the machine configuration can be modified as necessary for the new cluster, for instance updating disk installation, or adding SANs for the certificates.

Validate the Configuration Files

talosctl validate --config controlplane.yaml --mode cloud
talosctl validate --config worker.yaml --mode cloud

Create the Nodes

Create the Control Plane Nodes

First a control plane needs to be created, with the example below creating 3 instances in a loop. The instance type (noted by the --plan vc2-2c-4gb argument) in the example is for a minimum-spec control plane node, and should be updated to suit the cluster being created.

for id in $(seq 3); do
    vultr-cli instance create \
        --plan vc2-2c-4gb \
        --region $REGION \
        --iso $TALOS_ISO_ID \
        --host talos-k8s-cp${id} \
        --label "Talos Kubernetes Control Plane" \
        --tags talos,kubernetes,control-plane
done

Make a note of the instance IDs, as they are needed to attach to the load balancer created earlier.

vultr-cli load-balancer update $LOAD_BALANCER_ID --instances $CONTROL_PLANE_1_ID,$CONTROL_PLANE_2_ID,$CONTROL_PLANE_3_ID

Once the nodes are booted and waiting in maintenance mode, the machine configuration can be applied to each one in turn.

talosctl --talosconfig talosconfig apply-config --insecure --nodes $CONTROL_PLANE_1_ADDRESS --file controlplane.yaml
talosctl --talosconfig talosconfig apply-config --insecure --nodes $CONTROL_PLANE_2_ADDRESS --file controlplane.yaml
talosctl --talosconfig talosconfig apply-config --insecure --nodes $CONTROL_PLANE_3_ADDRESS --file controlplane.yaml

Create the Worker Nodes

Now worker nodes can be created and configured in a similar way to the control plane nodes, the difference being mainly in the machine configuration file. Note that like with the control plane nodes, the instance type (here set by --plan vc2-1-1gb) should be changed for the actual cluster requirements.

for id in $(seq 1); do
    vultr-cli instance create \
        --plan vc2-1c-1gb \
        --region $REGION \
        --iso $TALOS_ISO_ID \
        --host talos-k8s-worker${id} \
        --label "Talos Kubernetes Worker" \
        --tags talos,kubernetes,worker
done

Once the worker is booted and in maintenance mode, the machine configuration can be applied in the following manner.

talosctl --talosconfig talosconfig apply-config --insecure --nodes $WORKER_1_ADDRESS --file worker.yaml

Bootstrap etcd

Once all the cluster nodes are correctly configured, the cluster can be bootstrapped to become functional. It is important that the talosctl bootstrap command be executed only once and against only a single control plane node.

talosctl --talosconfig talosconfig boostrap --endpoints $CONTROL_PLANE_1_ADDRESS --nodes $CONTROL_PLANE_1_ADDRESS

Configure Endpoints and Nodes

While the cluster goes through the bootstrapping process and beings to self-manage, the talosconfig can be updated with the endpoints and nodes.

talosctl --talosconfig talosconfig config endpoints $CONTROL_PLANE_1_ADDRESS $CONTROL_PLANE_2_ADDRESS $CONTROL_PLANE_3_ADDRESS
talosctl --talosconfig talosconfig config nodes $CONTROL_PLANE_1_ADDRESS $CONTROL_PLANE_2_ADDRESS $CONTROL_PLANE_3_ADDRESS WORKER_1_ADDRESS

Retrieve the kubeconfig

Finally, with the cluster fully running, the administrative kubeconfig can be retrieved from the Talos API to be saved locally.

talosctl --talosconfig talosconfig kubeconfig .

Now the kubeconfig can be used by any of the usual Kubernetes tools to interact with the Talos-based Kubernetes cluster as normal.